Autowatch Ghost 2
Autowatch Ghost 2 is a revolutionary car immobiliser that safeguards against key-long theft, cloning, and relay theft. It is a discreet device that works quietly. A unique PIN code is required to be entered using the buttons on the steering wheel and centre console.
It is completely undetectable to thieves using diagnostic tools, because it emits radio signals. It's also easy to use since it doesn't require a tracker or extra fobs.
Cost of installation
A ghost immobiliser is a discreet device that is integrated into the car's CAN network and does not require additional fobs, or LED indicators. It's almost indestructible to thieves, and works on a completely different principle from standard car alarms. It stops the engine from starting until the specific sequence of buttons are triggered by the vehicle owner. This will ensure that only the owner is able to operate the vehicle and decrease the chance of it being stolen.
Ghost immobilisers are cheaper than traditional devices and can be put in place by trained technicians in just a few hours. They can also be moved between vehicles and are a cost-effective way to improve your car's security. You can also use an immobiliser ghost with a car tracking system that will provide an additional level of security for your vehicle.
Modern cars are easy to target for thieves using sophisticated equipment that can clone remote keys, open the vehicle, and then steal it. This is why it is so important to protect your vehicle with a ghost immobiliser. It will stop the vehicle from moving unless you press a certain sequence of buttons, providing you with peace of mind when handing your car over to valet parking or hiring a driver.
The Autowatch Ghost 2 is a innovative car security system that safeguards against the latest theft methods like key copying. The small device plugs into the CAN system of your vehicle and disables the motor when you enter the code. This is a discrete, concealed device that isn't affected by device spoofing or signal jamming. It also sends alerts to your mobile phone in the event that someone attempts to interfere with your vehicle.
The Autowatch Ghost 2 immobiliser is priced at PS499 including VAT and can be installed in a few hours at workplace or at home by one of our highly skilled TASSA (Autowatch) registered, DBS-security checked installers. It is a high-tech, low-maintenance device that is able to be easily moved from vehicle to vehicle and is compatible with most CAN-bus systems.
Cost of replacement keys
The Autowatch Ghost is a sophisticated piece of technology that offers the most advanced security against key cloning, hacking and vehicle theft. It is not dependent on additional key fobs and LED indicators or any other devices. Our trained technicians can install it in most cars and vans within a few hours. The system can be utilized together with car trackers for an even greater security.
The system is connected to your vehicle's CAN data network and therefore is not traceable by thieves. It will not cause any diagnostic lights to illuminate, because there are no radio signals. The criminal will also not be able access the OBD port on your vehicle since it is directly linked to the ECU (Engine Control Unit). This will prevent them from adding new key fobs or replacing the ECU that normally allows them to start the engine.
Furthermore, the ghost immobiliser is covered and hidden within the vehicle harness, which means it is nearly impossible for thieves to locate. The system generates a unique PIN code by pressing buttons on the steering wheel or dash. It must be entered to start the vehicle. Monty's can also be programmed to operate in a Service/Valet option, which allows you to temporarily start the car without having to enter the PIN code. This is beneficial in the event that you're giving your vehicle to a mechanic or valet parking service.
If the PIN code sequence is not entered, the CAN Ghost will prevent the vehicle from moving or stall the engine and gear box - according to your specific vehicle requirements. It can also be linked to a car tracker so that you can monitor the location of your vehicle on a map from any internet-enabled device.
The system is incredibly easy to install and is able to be moved from vehicle to, making it a great alternative for classic and sports automobiles. It doesn't require batteries or power cables since it is wired directly into the CAN network in your car. It is virtually undetectable and can be installed in just several hours by our TASSA-registered DBS-security-checked and certified technicians.
Cost of replacing a vehicle
Autowatch Ghost immobiliser gives advanced security against key hacking and cloning. It works by integrating directly with the vehicle's ECU, creating a barrier that's nearly impossible to breach without the correct PIN code. It is also TASSA-certified and insurance-approved, which makes it a great choice for anyone looking to increase the security of their car. This system could save you money on insurance for your car since most insurance companies offer discounts to vehicles with this system.
The Ghost system is undetectable to thieves and operates completely without radio signals. It connects with the CAN network of your vehicle and requires a unique PIN code in order to start your vehicle. It also stops hackers from gaining access to the system via diagnostic scans or by tampering with the OBD port on your car. Furthermore, the device employs a unique algorithm to identify and deactivate cloned keys.
While it is possible to install the Ghost immobiliser on your own, the procedure is risky and should be performed by a qualified professional. Incorrect installation can cause damage to your car's wiring and render the device ineffective. Additionally, a DIY installation can cause warranty issues for the device and your vehicle.
Ghost users are generally pleased with their gadget. They enjoy the security and peace of mind security it brings. Moreover it is simple to use and discreet in appearance. Most of them are happy with the fact that it can protect their vehicle from theft even in the event that they lose their keys.
However certain customers have had issues with the device's stop/start functionality. This can be caused by an improper configuration, or a problem that is independent of the Ghost immobiliser. These kinds of issues are uncommon however they can be easily solved by contacting the company who installed the Ghost.
It is recommended to hire an experienced Ghost installer, because when the device is damaged by a skilled hacker, it can be very expensive to repair or replace. The best way to avoid this is to make sure that the installer is licensed and has a good reputation. A reputable and vetted installer will demonstrate a strong commitment to customer satisfaction and stand behind the quality of their work.
Costs of insurance
Ghost immobilisers stop thieves from starting your vehicle. It works by connecting to the car's data network CAN and creating an individual code sequence. This must be entered prior to starting the engine. The device is able to be moved between vehicles and does not require batteries or power cables. It also works with a wide range of car alarms. So it can be used as a standalone security measure or as a complement to a traditional alarm system. It can be programmed to work on a new car if you intend to sell or trade your vehicle in the near future.
The autowatch ghost is a secluded immobiliser that is easy to install and will not be recognized by thieves. It makes use of the buttons on your car to input the PIN code, making it hard for thieves to detect its presence. It is also highly robust and weatherproof, which means it can withstand any type of weather. It is ideal for classics, sports cars and prestige vehicles which require battery isolation when parked for a long period of time.
ghost ii immobiliser -edge technology stops the cloning and cloning signals and bypassing door locks by directly connecting to CAN. It is a TASSA certified immobiliser that is regarded by insurance companies as a reliable deterrent to theft. It also comes with one of a kind feature, Stealth Active. This is unnoticeable by key cloning devices.
Unlike other car immobilisers, the Autowatch ghost is a low-maintenance device that does not require wiring, which means it doesn't interfere with the vehicle's electrical system or aesthetics. Installation is easy and can be done by technicians. However, it's important to remember that the device may be damaged if it's installed improperly. It's important to hire a professional to install the device to ensure the safety of your vehicle.
Although many people choose to install a ghost immobiliser themselves but it's best to seek out professional assistance in the event you're thinking about this option. You can cause electrical faults or misconnect wires if you try to install it yourself. In addition, improper placement could render the device ineffective or easily spotted by thieves. For this reason, it's an ideal idea to combine an immobiliser with other security measures such as GPS tracking and alarm systems. This will provide you with the best chance of obtaining a reduced insurance premium.